60950 (IEC or EN) is a safety standard for Information Technology Equipment
(ITE).  It is the standard for evaluation of a piece of ITE equipment for
electric shock, energy hazards, fire hazards, radiation hazards, chemical
hazards, and mechanical hazards.

60529 (IEC or EN) is the ingress protection standard.  It is a test standard
which enclosures are tested for the extent to which they protect against
personnel access, dust access, and water access in various environmental
conditions.

They are not comparable, they are complementary.  Say you've got an outdoor
computer.  The outdoor concerns, such as rain and dust, could be evaluated
to 60529, where the electrical safety concerns inherent to computers (shock,
fire, etc.) would be evaluated to 60950.

Hope this helps.
Sam
---
Sam Davis
Product Safety Engineer
Professional Testing Inc.
(512)244-3371 x112
www.ptitest.com



From: owner-emc-p...@majordomo.ieee.org
[mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of Reginald Henry
Sent: Wednesday, September 24, 2003 8:34 AM
To: emc-p...@majordomo.ieee.org
Subject: Safety Standards Comparison



Group,

SAFETY:         EN60950 vs.     IEC60529 (Taiwan ) standard.

Has anyone here worked with these two standards enough to give me  the
"basic" differences and similarities between the two ?


Thanks in advance


Reg Henry



This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               emc_p...@symbol.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc




This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.

Visit our web site at:  http://www.ewh.ieee.org/soc/emcs/pstc/

To cancel your subscription, send mail to:
     majord...@ieee.org
with the single line:
     unsubscribe emc-pstc

For help, send mail to the list administrators:
     Ron Pickard:              emc-p...@hypercom.com
     Dave Heald:               emc_p...@symbol.com

For policy questions, send mail to:
     Richard Nute:           ri...@ieee.org
     Jim Bacher:             j.bac...@ieee.org

Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
    http://www.ieeecommunities.org/emc-pstc

Reply via email to