Almost perfect - just one conductor short :-( > From: neve...@comcast.net > Reply-To: neve...@comcast.net > Date: Thu, 18 Sep 2003 18:14:57 +0000 > To: emc-p...@majordomo.ieee.org > Subject: RE: need shielded cable > > > For example: > > http://www.ethernetrail.com/Datasheets/Flex_cable.pdf > > Neven >> Hi Neven, >> >> Yes - A shielded telcomm cable is the way to go I agree. >> >> -----Original Message----- >> From: owner-emc-p...@majordomo.ieee.org >> [mailto:owner-emc-p...@majordomo.ieee.org]On Behalf Of >> neve...@comcast.net >> Sent: Thursday, September 18, 2003 9:58 AM >> To: emc-p...@majordomo.ieee.org >> Subject: Re: need shielded cable >> >> >> >> Would a cable with four twisted pairs + shield work? If yes, you may >> consider >> CAT5 (5 twisted per inch) or CAT3 (3 twists per inch) shielded Ethernet >> cable. >> They come in AVG 24 and 26 sizes, stranded and colid, with foil and/or >> braided >> shield. I am not sure what manufacturer carries what types, but I have seen >> all >> sorts of them around - I hope you can foind it by doing Internet search. >> >> Neven >>> >>> List Members, >>> >>> I am looking for a five conductor overall shielded cable. The wires need >> to >>> be stranded and very small gauge, AWG 26 or smaller. My customer is >>> interested in a double-shielded configuration - braid on the outside, foil >>> on the inside. >>> >>> I have had no success finding such a product. >>> >>> The application is such that I think that a cigarette wrap foil alone >> would >>> work, but I am concerned about its ruggedness; this product will be worn >> by >>> men at work. Any suggestions pro/con on using a foil shield under such >>> conditions, including how to terminate it gently but securely and >>> peripherally? >>> >>> Thank you. >>> >>> Ken Javor >>> >>> >>> ------------------------------------------- >>> This message is from the IEEE EMC Society Product Safety >>> Technical Committee emc-pstc discussion list. >>> >>> Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ >>> >>> To cancel your subscription, send mail to: >>> majord...@ieee.org >>> with the single line: >>> unsubscribe emc-pstc >>> >>> For help, send mail to the list administrators: >>> Ron Pickard: emc-p...@hypercom.com >>> Dave Heald: emc_p...@symbol.com >>> >>> For policy questions, send mail to: >>> Richard Nute: ri...@ieee.org >>> Jim Bacher: j.bac...@ieee.org >>> >>> Archive is being moved, we will announce when it is back on-line. >>> All emc-pstc postings are archived and searchable on the web at: >>> http://www.ieeecommunities.org/emc-pstc >> >> ------------------------------------------- >> This message is from the IEEE EMC Society Product Safety >> Technical Committee emc-pstc discussion list. >> >> Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ >> >> To cancel your subscription, send mail to: >> majord...@ieee.org >> with the single line: >> unsubscribe emc-pstc >> >> For help, send mail to the list administrators: >> Ron Pickard: emc-p...@hypercom.com >> Dave Heald: emc_p...@symbol.com >> >> For policy questions, send mail to: >> Richard Nute: ri...@ieee.org >> Jim Bacher: j.bac...@ieee.org >> >> Archive is being moved, we will announce when it is back on-line. >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieeecommunities.org/emc-pstc >> > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > majord...@ieee.org > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Ron Pickard: emc-p...@hypercom.com > Dave Heald: emc_p...@symbol.com > > For policy questions, send mail to: > Richard Nute: ri...@ieee.org > Jim Bacher: j.bac...@ieee.org > > Archive is being moved, we will announce when it is back on-line. > All emc-pstc postings are archived and searchable on the web at: > http://www.ieeecommunities.org/emc-pstc >
This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc