I have a sample of a flexible ferrite material from a company called Tokin.
It is not a sleeving; but it is a thin (about .040") sheet, flexible enough to be rolled into a tubular shape. Personally, I haven't found an application for this stuff. Chris Maxwell | Design Engineer - Instruments Group email chris.maxw...@nettest.com | dir +1 315 266 5128 | fax +1 315 797 8024 NetTest | 6 Rhoads Drive, Utica, NY 13502 | USA web www.nettest.com | tel +1 315 797 4449 | > -----Original Message----- > From: lfresea...@aol.com [SMTP:lfresea...@aol.com] > Sent: Friday, September 12, 2003 3:29 PM > To: emc-p...@ieee.org > Subject: Ferrite Sleeving > > Hi, > > I'm looking for sources of flexible Ferrite sleeving. Can anyone help? > > Thanks, > > Derek Walton This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: emc_p...@symbol.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
