To my fellow EMC Engineers and Experts: Does anyone consistently use CISPR 25 in their testing? Here in the US it is constantly used, mainly now by the Big Three in their specifications as they work more towards harmonizing them.
I have an issue and a little research I am conducting regarding Radiated Emissions Testing per CISPR 25. The 2002 Edition has some set-up changes >from the 1995 Edition. I believe I have pinpointed the answer but I am wondering if anyone has done testing per the 1995 Edition and now on the 2002 Edition and notice changes in the results, or if someone has done work with the 1995 Edition and could quickly and easily run the same DUT to the set-up in the 2002 Edition and study the changes. Thank you. Rob Kado EMC Engineer VWS - Auburn Hills, USA Tel: 248-340-3828 / Fax: 248-340-3316 Internal Location 3M2 "This e-mail message is intended only for the use of the intended recipient(s). The information contained therein may be confidential or privileged, and its disclosure or reproduction is strictly prohibited. If you are not the intended recipient, please return it immediately to its sender at the above address and destroy it." This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ieee-pses.org/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
