http://www.ieee-pses.org/symposium http://www.emc2004.org/ -------------------------------------------------- You don't mention anything about the data requirements, so this may be silly, but why not use a standard "Y" capacitor like you would use for power supply filtering with the base of the "Y" connected to the hot side of the signal generator? Brent G DeWitt Loveland, CO http://home.ix.netcom.com/~bdewitt
From: [email protected] mailto:[email protected]]On Behalf Of Howard Ji (howardji) Sent: Thursday, July 08, 2004 6:01 PM To: [email protected] Subject: help needed to inject/induce 100 V, 60 Hz common-mode noise http://www.ieee-pses.org/symposium http://www.emc2004.org/ -------------------------------------------------- Hi, I need to inject/induce a 60Hz common mode signal with a p-p voltage of around 100V onto a RJ11 cable. I have signal generator, amplifier and some coupling devices but none of my stuff works at 60 Hz. Any information would be appreciated. Thanks in advance. Howard ------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. IEEE PSES Main Website: http://www.ieee-pses.org/ To post a message send your e-mail to [email protected] Instructions for use of the list server: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
