John I'll try that route, but I don't think we have any close contacts on EPL/66 nowadays (most of ours are with the EMC, and related, committees alone)
John Allen -----Original Message----- From: John Woodgate [ mailto:j...@jmwa.demon.co.uk] Sent: 08 December 2004 10:30 To: emc-p...@ieee.org Subject: Re: IEC/EN 61010-1 Edition 2 In article <bfe68ab0084cd311b4fb00508b014c8706063...@mercury.era.co.uk>, John Allen <john.al...@era.co.uk> writes > For the mutual benefit (and certainly for my own!) I am going to > try to put together a collated set of the comments on the above, > from what we already knew and what people have sent me in the last > few days. > > I will also include anything I can find publically on IEC and > CENELEC CTL decisions, etc. > > I will then make it available to anyone who wants it - warts and > all, and obviously with no guarrantees as I am not "on the inside"! > > I aim to do this within before Xmas. > > So, if anyone has anything else to add/points to query, then please > let me know before that. Don't any of your colleagues at ERA know anyone on BSI EPL/66 who might co-operate with information not easily accessible? -- Regards, John Woodgate, OOO - Own Opinions Only. The good news is that nothing is compulsory. The bad news is that everything is prohibited. http://www.jmwa.demon.co.uk Also see http://www.isce.org.uk ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com ********************************************************************** Copyright ERA Technology Ltd. 2004. (www.era.co.uk). All rights reserved. The information supplied in this Commercial Communication should be treated in confidence. No liability whatsoever is accepted for any loss or damage suffered as a result of accessing this message or any attachments. ********************************************************************** _____________________________________________________________________ This e-mail has been scanned for viruses by MCI's Internet Managed Scanning Services - powered by MessageLabs. For further information visit http://www.mci.com ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
