Here at Valeo we have the EM-Test P-30C. This in our opinion is a great ESD Gun and thus far we have had no problems. Easy to use, lightweight, many options on various networks etc.....
We also own the Transient Immunity Generators from EM Test. We have tried several other brands and the EM Test are hands down the best units in terms of value, service, and capabilities. With the main set of generators (EFT, MPG, VDS, and LD) along with their software you can perform 90% of the transients required by automotive manufacturers out there..... I know I sound like a salesman but I am not. I have all this equipment and it really performs well. I also have a very good relationship with Amplifier Research (flagship company of EM TEST) and they have always been helpful with any questions or needs I have had. Rob Kado EMC Engineer VWS - Auburn Hills, USA Tel: 248-340-3828 / Fax: 248-340-3316 Internal Location 3M2 "G.Gremmen" <g.grem...@cetest.nl> To: <emc-p...@ieee.org> Sent by: cc: owner-emc-p...@listserv.ie Subject: experience with immunity testers EE.ORG 11/12/2004 08:18 AM I am on the edge of selecting a new generation Immunity test equipment up to 6 kV Surge, EFT, Telecom pulse and Ringwave, and ESD testing up to 30 kV Does any of you have any experience to share about Combitesters of: Schaffner ? EM-test ? EMC-partner ? Good and bad, all are welcome. Regards, Gert Gremmen Approvals manager ====================================================== ce-test, qualified testing + Independent Consultancy Services + Compliance Testing and Design for CE according to: Electro magnetic Compatibility 89/336/EC Electrical Safety 73/23/EC Medical Devices 93/42/EC Radio & Telecommunication Terminal equipment 99/5/EC + Improvement of Product Quality and reliability testing Website: www.cetest.nl (english) www.ce-test.nl (dutch) Phone : +31 10 415 24 26 Fax : +31 10 415 49 53 ====================================================== This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc "This e-mail message is intended only for the use of the intended recipient(s). The information contained therein may be confidential or privileged, and its disclosure or reproduction is strictly prohibited. If you are not the intended recipient, please return it immediately to its sender at the above address and destroy it." This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Scott Douglas emcp...@ptcnh.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc