Send for Leslie Bai. Regards Jeff Jin SIEMIC InfoTech (China) Ltd. www.siemic.com.cn SIEMIC (USA) Inc. www.siemic.com **************************** Hi, The RFID requirements for Japan will depend on the TX power, below 500uV/m at 3m distance, it does not need any approval.. If over 500uV/m at 3m distance, MIC (formerly MPHPT) certification is required base on Telec Specification and Test Method under new Japan Radio Law, Article 44, Clause 100, sub-clause 1, and Article 46. Summarized parameters and specifications are: 1. Carrier Frequency: 13.56MHz with max 50ppm tolerance 2. Electric field strength: Below spectrum Mask (available upon request) 3. Spurious Emissions: Below 50uW 4. Exposured strength to human body: Below 60.77uV/m and 0.16A/m in 6min.average. Pls note under the new Japan Radio Law, the new organization, MIC, is the ONLY government agency that issues Type Approval on 13.56MHz RFID. May also advise SIEMIC Labs in San Jose California is a designated RFID Test Lab for Japan MIC RFID Certifications. Any further questions, pls let me know. Thanks Leslie Leslie Bai SIEMIC, Inc. 2206 Ringwood Avenue San Jose, CA 95131 Tel:+1(408) 526 1188 ext 803 Fax:+1(408) 526 1088 www.siemic.com *************************************
rehel...@mmm.com wrote: Can some one give me a brief outline of the required tests and test standards needed in Japan for RFID equipment operating at 13.56 MHz? Are they based on IEC 300 330-1 and -2? Thanks in advance, Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 ========================= This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc __________________________________________________ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com ----------------- ---------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
