Bob Thanks for your reply. It seems to be a different view to that of John Woodgate's. Thus can I ask you where these standards are defined as being family standards unto themselves?
Ian Gordon > -----Original Message----- > From: rehel...@mmm.com [mailto:rehel...@mmm.com] > Sent: 09 November 2005 11:31 > To: emc-p...@ieee.org > Subject: Re: Harmonics and flicker > > > A standard can not remove the requirement for harmonics and > flicker testing > because 61000-3-2 and 61000-3-3 are family standards unto > themselves (all > equipment equal to or less than 16 amps).. > > Bob Heller > 3M EMC Laboratory, 76-1-01 > St. Paul, MN 55107-1208 > Tel: 651- 778-6336 > Fax: 651-778-6252 *********************************************************************** The information contained in this email and any attachments may be confidential and is provided solely for the use of the intended recipient(s). If you are not the intended recipient, you are hereby notified that any disclosure, distribution, or use of this e-mail, its attachments or any information contained therein is unauthorised and prohibited. If you have received this in error, please contact the sender immediately and delete this e-mail and any attachments. No responsibility is accepted for any virus or defect that might arise from opening this e-mail or attachments, whether or not it has been checked by anti-virus software. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/listserv/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc