Wow! English is my first language too.
I read that as make it fail and "repeat" to make it fail at
the same failure point. Not, 'report' the failure pont.
ARRRRGGGG! I need to go home. Where is my rock when I
need it?
- Robert -
On Wed, 21 Dec 2005 16:04:58 -0800
ravinder.ajm...@hitachigst.com wrote:
> I don't see any contradiction here. Step 3 clearly
> states that if the
> sample passes the earlier test, then keep increasing the
> voltage until the
> sample fails.
>
> Regards, Ravinder
> Server PCB Development
> Hitachi Global Storage Technologies
>
>
> Email: ravinder.ajm...@hitachigst.com
>
>
>
> "Robert A. Macy" <m...@california.com>
> Sent by: emc-p...@ieee.org
> 12/21/2005 08:11 AM
>
> To
> Koh <koh...@singnet.com.sg>
> cc
> emc-p...@ieee.org
> Subject
> Re: Mains test - India
>
>
>
>
>
>
> Interesting wording. Make it fail with permanent damage
> to
> the supply, then repeat the test. Hmmm....am I the only
> one to see a failure in this logic?
>
> - Robert -
>
> On Wed, 21 Dec 2005 23:15:19 +0800
> Koh <koh...@singnet.com.sg> wrote:
> > There shall be no permanent damaged to the power supply
> > or the speaker connected to the power supply during or
> > after the test.
> > 3) If the sample pass the above test, continue test
> with
> > single 1 sec surges at 10V increments from 410Vac until
> > failure and report failure limit.
>
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to emc-p...@ieee.org
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas emcp...@ptcnh.net
Mike Cantwell mcantw...@ieee.org
For policy questions, send mail to:
Jim Bacher: j.bac...@ieee.org
David Heald: emc-p...@daveheald.com
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
