Many of the product family standards (PFS) call out their own level and duration of voltage dip or interrupt using the testing techniques of 61000-4-11. (61326-1: 1/2 cycle 100%; CISPR 24, Table 4) This has been a topic of discussion around here, what effect on compliance does a standards change have if it is not tied to a harmonized standard? MHO, it means the PFS will eventually correct to the testing technique as it is deemed necessary by the TC. And make sure you can test to the updated technique in the mean time. Regards, Doug
_____ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Pettit, Ghery Sent: Tuesday, March 28, 2006 10:03 AM To: Rodger Gensel; cecil.gitt...@kodak.com Cc: EMC-PSTC Subject: RE: New amendment IEC 61000-4-11 But what product family standard are you using that calls out this test method? If it is CISPR 24 (and EN 55024) this change doesn’t matter as CISPR 24 uses dated references for the test methods. Check your product family standard to see if the same happens there. Ghery S. Pettit _____ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Rodger Gensel Sent: Tuesday, March 28, 2006 7:29 AM To: cecil.gitt...@kodak.com Cc: EMC-PSTC Subject: RE: New amendment IEC 61000-4-11 Cecil: This specification IEC 61000-4-11:2004 has been published as of 3/1/05 and the DOW (Date of Withdrawal) is 6/1/2007. It is this version of the standard that the new 80% dip level has been introduced. Regards, Rodger _____ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of cecil.gitt...@kodak.com Sent: Tuesday, March 28, 2006 10:05 AM To: EMC-PSTC Subject: New amendment IEC 61000-4-11 I got a Voltage dips / sags / interrupts question . Is there a new amendment to IEC 61000-4-11 where in one of the test criteria drop out is 80 % with 25 cycles , when does it become effective ? Regards Cecil A. Gittens - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
