In message <002201c66e44$36e77dd0$13655ad2@LocalHost>, dated Wed, 3 May 2006, Kim Young-sik <young...@eri.re.kr> writes > >Hi, All > >When flicker & Harmonics test! > >EUT's AC input line 3 phase used, but that no have neutral line. > >Only used R,S,T. > >- That product flicker & harmonics must test?? > > If must be test?? > >- How can be test ?( impedence? ... ) > The standards IEC/EN 61000-3-2 (or -12) and IEC/EN 61000-3-3 (or -11) explain how to set up balanced 3-phase equipment for testing. The test set-ups are NOT the same.
There is too much information to reproduce here, even if that were permissible. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk 2006 is YMMVI- Your mileage may vary immensely. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc