Jeff Chambers asked: <and the Laplace unit seems good value for money to the small organisation I work for. Does anybody have experience with this instrument, that would provide that 'warm feeling'?>
I used the Laplace analyser and their Antenna as well, with very useful and very reliable results over the period 1994 to 2000 or so. It's not 'Calibrated' as such, and I don't suppose it's results would stand up in a court of law if you were arguing about +/- 1db. But as a diagnostic and emissions indicator it was quite invaluable, and very reliable. It's a simple device, very small, very cheap, basically a scanning AM receiver with AGC indication, and a simple Log perodic antenna, but does what it says on the tin very well. If used for checking emissions for absolute compliance, leave a few db's safety marging and it should be a very good indicator. Good luck. Chris Duprés *******************Internet Email Confidentiality Footer******************* The contents of this e-mail message (including any attachments hereto) are confidential to and are intended to be conveyed for the use of the recipient to whom it is addressed only. If you receive this transmission in error, please notify the sender of this immediately and delete the message >from your system. Any distribution, reproduction or use of this message by someone other than recipient is not authorized and may be unlawful. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
