Hi all I have a passive cable TV distributor box which connects a coax TV antenna signal to a Ethernet cable system (1 pair of 4 used). The product shall be tested according to EN 50083-2 as fare as I can see, but the problem is that the Ethernet cable is 100 ohm and the standard tests at 75 ohm terminations.
Have I overlooked any standards or special requirements or can I just test the product for screening effectiveness according to the standard with 75 ohm terminations. Kim Boll Jensen Bolls Rådgivning Ved Gadekæret 11F DK-3660 Stenløse Tlf.: 48 18 35 66 Fax: 48 18 35 30 Mobil: 22 99 69 91 E-mail: [email protected] web: www.bolls.dk - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
