My apologies John....
The clock is operating at 33MHz; we have very NB spikes from 33MHz and on at
every harmonic....
The lines are terminated 100 Ohm as per spec however; the screen schematics
have been reviewed and are sound but the radio....
Rob Kado
EMC Engineer - Module Laboratory Operations
DaimlerChrysler EMC Laboratory
CIMS 481-47-20
800 Chrysler Drive
Auburn Hills, MI 48326
Desk: (248) 576-6915
Mobile: (248) 467-0639
Fax: (248) 576-7045
John Woodgate <j...@jmwa.demon.co.uk>
Sent by: emc-p...@ieee.org
01/29/2007 02:41 PM
To
emc-p...@ieee.org
cc
Subject
Re: LVDS
In message
<of92f83c5e.3f325ca3-on85257272.006a8444-85257272.006a8...@wkamerica.note
s.chrysler.com>, dated Mon, 29 Jan 2007, rk...@daimlerchrysler.com
writes
>Low Voltage Differential Signal.....
Oops! 'Abbreviation memory not accessible! Re-boot at earlier stage in
life cycle.'
The whole point of LVDS is that it has inherently low emission. So would
the OP please be more precise about exactly what the problem is?
Balanced circuits, like most things, are easy WHEN you know how. But you
can easily be badly bitten if you only think you know.
--
OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk
There are benefits from being irrational - just ask the square root of 2.
John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to emc-p...@ieee.org
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas emcp...@ptcnh.net
Mike Cantwell mcantw...@ieee.org
For policy questions, send mail to:
Jim Bacher: j.bac...@ieee.org
David Heald: emc-p...@daveheald.com
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
- ---------------------------------------------------------------- This
message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to emc-p...@ieee.org
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org
For policy questions, send mail to:
Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
