Steve, Most accrediting bodies (A2LA, UKAS, NVLAP...etc) have lists of accredited calibration labs on their websites with searchable scopes. As also pointed out, the manufacturer is often a good source of a reference. Good luck, Doug
_____ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Steve Richardson - Blackwood EMC Sent: Wednesday, March 14, 2007 6:39 AM To: emc-p...@ieee.org Subject: 2Nm Impact hammer calibration Hello, I am looking for a calibration facility to carry out a calibration on a 2Nm impact hammer (re EN 60068-2-75). Ideally the lab will be accredited against ISO 17025 with a turnaround of less than 4 weeks. There are a few labs which can do the usual 0.5 and 1.0Nm hammers but 2.0Nm seems a bit more niche. Any pointers would be much appreciated Thanks in advance _____ Steve Richardson Blackwood EMC Ltd Unit 8 Woodfieldside Business Park Pontllanfraith Blackwood NP12 2DG tel: +44 (0) 1495 229219 fax: +44 (0) 1495 228331 <http://www.blackwoodemc.co.uk/> www.blackwoodemc.co.uk - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
