Trying to find out the different required creepage distances on a PCB (it's
an AC/DC PSU) where the primary voltage is 230VAC avd secondary voltage is
24VDC.

Interested in creepage distances
1) primary to secondary on the PBC
2) Primary to chassis
3) Secondary to chassis
4) Between primary leads on the PCB

I have the 60950:1999 in front of me and a lot of "creepage tables" in
chapter 2.10.4.

Anyone out there who could give me a short guidance how to interpret the
tables in my case?

Thanks.

#Amund

-

This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list.    Website:  http://www.ieee-pses.org/

To post a message to the list, send your e-mail to emc-p...@ieee.org

Instructions:  http://listserv.ieee.org/request/user-guide.html

List rules: http://www.ieee-pses.org/listrules.html

For help, send mail to the list administrators:

     Scott Douglas           emcp...@ptcnh.net
     Mike Cantwell           mcantw...@ieee.org

For policy questions, send mail to:

     Jim Bacher:             j.bac...@ieee.org
     David Heald:            emc-p...@daveheald.com

All emc-pstc postings are archived and searchable on the web at:

    http://www.ieeecommunities.org/emc-pstc

______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Reply via email to