It is difficult to beat Bartington for this measurement. Their fluxgate sensors are highly accurate and sensitive.
You can use a low frequency spectrum analyzer or a low cost DAQ and suitable software. http://www.bartington.com/ I am not aware of a specific standard. John McAuley Compliance Engineering Ireland Ltd www.cei.ie ***************************************************************** DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorised. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator From: Gordon,Ian [mailto:ian.gor...@bocedwards.com] Sent: Wednesday, April 18, 2007 1:06 AM To: 'IEEE EMC & SAFETY PSTC' Subject: Magnetic field testing All Can anybody suggest a standard which describes how to perform magnetic field emission testing from DC to at least 500Hz in addition to a guide as to what instrumentation to use? Ideally we would like a plot of the field against its level, similar to that from a receiver as in electric field emission testing. Ian Gordon ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc