I am only suggesting buying the manual from Schwarzbeck, not another unit. I hope that they want less than €1640 for a manual.
Ted Eckert American Power Conversion/MGE http://www.apc.com/ The items contained in this e-mail reflect the personal opinions of the writer and are only provided for the assistance of the reader. The writer is not speaking in an official capacity for APC-MGE or Schneider Electric. The speaker does not represent APC-MGE's or Schneider Electric's official position on any matter. "Cortland Richmond" <[email protected] To et> "emc-pstc" <[email protected]> Sent by: cc [email protected] Subject Re: Schwarzbeck FSME 1515? 05/24/2007 06:47 PM Please respond to [email protected] t Noch nicht, aber bald! They want as much as 1640 euros for one (calibrated warranted, etc.) and this cost about $210 including shipping with the usual eBay "I don't know how to check it" non-warranty. UPS dented it, of course. I checked the amplitude calibration today at work and found it within 1 dB for almost all settings of internal attenuators and input levels. The surge-protected input is 10 dB less sensitive by design; it also differs by up to between .2 and 1 dB from the other input when that's taken into account, but that aside, accuracy is very nice over the 85 KHz - 30 MHz range, and the meter detector appears to be QP by default. I'll use a pair of 12V AGM batteries for portable use, which will come in very handy for some magnetic field HF and lower measurements at work. And need I mention BPL? Cortland KA5S > [Original Message] > From: <[email protected]> > > Have you tried contacting Schwarzbeck? > http://www.schwarzbeck.de/ > > They sell their own used equipment. Their web side shows a FSME 1515 with > a manual sitting on top. You might be able to get a copy from them. > > Ted Eckert > American Power Conversion/MGE > http://www.apc.com/ - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________
