Dear Mr. Loerzer, Digital devices used exclusively as industrial, commercial, or medical test equipment are subject only to the general conditions of operation in Sections 15.5 and 15.29 and are exempt from the specific technical standards and other requirements of Part 15. That said, exempted device are required not to cause harmful interference. If the device is found to cause interference, it is required that the operator stop operating the device, and operation shall not resume until the condition causing the harmful interference has been corrected. Although not mandatory, the FCC recommends that the manufacturer of an exempted device endeavor to have the device meet the specific technical standards in Part 15 Subpart B for Class A unintentional radiators.
Regards, Bill Stumpf D.L.S. Electronic Systems, Inc. EMC Testing & Consulting 166 South Carter Street Genoa City WI, 53128 262-279-0210 This e-mail and any attachments may contain confidential material for the sole use of the intended recipient. If you are not the intended recipient, please be aware that any disclosure, copying, distribution or use of this e-mail or any attachment is prohibited. If you have received this e-mail in error, please contact the sender and delete all copies. Thank you for your cooperation _____ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of M. Loerzer-Mobile (GLOBALNORM) Sent: Wednesday, September 19, 2007 8:53 AM To: emc-p...@ieee.org Subject: AW: FCC Part 15 and electrical equipment of machinery Hi FCC Part 15 Experts, if a EU machinery tool supplier bring a machinery into the US market and this machinery includes "microprocessor controlled units" like programmable electonic systems, drives, touc screens, ect. does the "overall machinery system" need a FCC Part 15 approval? The equipments are not available single units in the US market and haven´t therefore a single FFC approval. But in my understanding the "machinery system" is a "unintential radiator" with clock frequencies > 9 kHz (PES, drives) and must comply with FCC Part 15. Is that correct? Mit freundlichen Grüßen Yours sincerely Dipl.-Ing. Michael Loerzer Managing Director Regulatory Affairs Specialist Fon: +49 30 3229027-50, Direct Call: -51 Mobile: +49 177 3229027 (new) Fax: +49 30 3229027-59 <http://www.globalnorm.de/> www.Globalnorm.de Globalnorm GmbH, Sitz der Gesellschaft: Alt-Moabit 94, 10559 Berlin Geschaeftsfuehrer: Dipl.-Ing. Michael Loerzer Amtsgericht Berlin-Charlottenburg HRB 105204 B, USt-ID-Nummer: DE251654448 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
