Hi Guys,
We make SD+ product. One side is SD interface and other is USB. This device when used as USB drive which leaves SD pads open, fails ESD test per IEC61000-4-2. The failure is in SD side i.e. SD interface does not work after this test. Can we CE certify this product as SD INTERFACE? Will any warning /disclaimer saying that we do not meet CE for USB interface will help us on this. Or we will not be able to certify this as USB interface is a Digital device and hence it can not be put in European market without CE Any opinion/guidance will be really helpful. Thanks Sudhakar Wasnik ______________________________________________________________________ This e-mail has been scanned by MCI Managed Email Content Service, using Skeptic(tm) technology powered by MessageLabs. For more information on MCI's Managed Email Content Service, visit http://www.mci.com. ______________________________________________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc