Quick question to the US requirements experts. If I want to get a product I am developing UL approved but a circuit breaker I plan to use is not UL listed? I can get a CB Certificate and test report for the breaker. If I have that can I get UL approval for my device even though the breaker is not UL listed or must I have the breaker tested again for UL listing etc?
Many thanks. Best regards, Kevin Richardson Stanimore Pty Limited Compliance Advice & Solutions for Technology (Legislation/Regulations/Standards/Australian Agent Services) Ph: 02-4329-4070 (Int'l: +61-2-4329-4070) Fax: 02-4328-5639 (Int'l: +61-2-4328-5639) Mobile: 04-1224-1620 (Int'l: +61-4-1224-1620) Email: [email protected] or [email protected] URL: www.stanimore.com This material (this message and the information contained in all attachments to this message) is confidential and/or privileged information and is intended only for the addressee/s named above. Any unauthorised dissemination, copying, use of or reliance upon this material by persons or entities other than the addressee/s named above is prohibited. If you receive this material in error, please notify Stanimore Pty Limited and destroy all copies (electronic and hardcopy) of this message and all attachments immediately. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to [email protected] Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas [email protected] Mike Cantwell [email protected] For policy questions, send mail to: Jim Bacher: [email protected] David Heald: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
