Here is the guidance doc for the R&TTE Directive: http://ec.europa.eu/enterprise/sectors/rtte/files/guide2009-04-20_en.pdf
Section 6.5 goes over marking, and 6.5.1 shows the CE with the Notified Body identification number and the class identifier (alert sign). Section 4.2 has specific information on classes. Scott Aldous Compliance Engineer Solar Energy +1.970.492.2065 Direct +1.970.214.9427 Mobile +1.970.407.5872 Fax +1.541.312.3832 Main scott.ald...@aei.com 1625 Sharp Point Drive Fort Collins, CO 80525 www.advanced-energy.com/solarenergy -----Original Message----- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of lauren_cr...@amat.com Sent: Wednesday, October 05, 2011 2:03 PM To: oconne...@tamuracorp.com; EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: CE Mark with exclamation mark Keep in mind there is also an bold-exclamation-mark-inside-a-bold-circle known as the "alert" mark of the RTTE (Radio and Telecommunications Terminal Equipment) Directive. I believe it is supposed to be used for "class II" radio transmitters. I am probably mistaken when I guess that class II transmitters use frequencies that have not been harmonized across all EU Member States yet. I suggest looking for a guidance document on the EU Commission website. Regards, -- Lauren Crane (mr.) Product Regulatory Analyst | Corporate Product EHS | Applied Materials Office 512.272.6540 | Mobile 512.736.7201 | America - Europe - Asia - External Use – The opinions expressed here are my own opinions only and not necessarily those of my employer. ** Save paper and trees! Please consider the environment before printing this e-mail. -----Original Message----- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Brian Oconnell Sent: Wednesday, October 05, 2011 2:43 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: CE Mark with exclamation mark The '!' notation is typically used within triangle (ISO symbol 0434) to indicate that there is something important that the operator needs to read about; or that it is being used to indicate special components on a PCB. Is a stand-alone '!' being proposed? Did they refer to a symbol out of IEC60417 or ISO7000? Would really like to know the reference for this. Brian -----Original Message----- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of Christopher Sent: Wednesday, October 05, 2011 12:05 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: CE Mark with exclamation mark Folks, I have a question Our overseas test lab suggested to add “exclamation mark" behind CE mark because it’s related to RF 2.4GHz products to meet CE requirement Is it necessary? Our AP product is a 80211 a/b/g/n with DFS Christopher - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> ________________________________ - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> This message, including any attachments, may contain information that is confidential and proprietary information of Advanced Energy Industries, Inc. The dissemination, distribution, use or copying of this message or any of its attachments is strictly prohibited without the express written consent of Advanced Energy Industries, Inc. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
