Hi Ian
b) is the correct method. Best regards John McAuley Compliance Engineering Ireland Ltd Clonross Derrockstown Dunshaughlin Co Meath Ireland Tel: +353 1 8256722 Fax: +353 1 8256733 www.cei.ie <http://www.cei.ie/> john.mcau...@cei.ie ***************************************************************** DISCLAIMER: The information contained in this e-mail may be confidential and is intended solely for the use of the named addressee. Access, copying or re-use of the e-mail or any information contained therein by any other person is not authorised. If you are not the intended recipient please notify us immediately by returning the e-mail to the originator ________________________________ From: Ian White (UK) [mailto:ian.wh...@uk.spiraxsarco.com] Sent: 27 September 2011 11:00 To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] BS EN61000-4-3 and calibrated fields. Could you please help: Could you explain what is the correct procedure when using an anechoic chamber which is calibrated and operating to EN61000-4-3. During calibration of the chamber, a calibration file is made and it is assessed according to the guidelines laid down under BS EN61000-4-3. During calibration the chamber is empty. During a normal test run a UUT is put into the chamber. The questions is : a) Do you use the calibration file as the starting point and adjust the field strength which may have changed due to the UUT being in the chamber. b) Just take the calibration file and run it and except the filed strengths would have changed due to the UUT being in the chamber. Thanks Ian White Compliance and Reliability. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>
