There is no vertical ground plane, unless you consider the shield room wall behind the ground plane to be one, and it is covered with absorber. Ken Javor
Phone: (256) 650-5261 ________________________________ From: <[email protected]> List-Post: [email protected] Date: Fri, 26 Aug 2011 08:02:34 -0500 To: <[email protected]> Subject: RE-102 In MilStd 461F, the test RE-102 shows a vertical ground plane in the test setup (Figures 2 and 3) and the table top ground plane bonded to the vertical ground plane. It does not make sense to me to have a vertical ground plane in a radiated test setup. Am I missing or not understanding something? Thanks, Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651-778-6336 Fax: 651-778-6252 - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher <[email protected]> David Heald <[email protected]>
