Gentlefolks,
Quick-connectors are (of course) made for certain cross sectional area of wire. Would it be a violation of IEC 60950 or IEC 60065 if two wires are terminated in the same quick-connector as long as the specified cross sectional area for the connector is fulfilled? If two wires are allowed, do they have to have the same cross sectional area? Thanks in advance, and have a good summer Niels Hougaard Niels Hougaard Bolls Rådgivning Ved Gadekæret 11F DK-3660 Stenløse Denmark T: +45 48 18 35 66 F: +45 48 18 35 30 n...@bolls.dk <mailto:n...@bolls.dk> www.bolls.dk <http://www.bolls.dk/> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>