I used emscan with good success several years ago. Apparently it has changed (improved?) over the years. http://www.emscan.com/ John Shinn
________________________________ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Ted Eckert Sent: Tuesday, November 30, 2010 5:30 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: Camera to take pictures of 30MHz to 1000MHz Electromagnetic-Spectrum emissions There are a number of flatbed EMC scanners on the market. This is another that I am familiar with. http://www.detectus.se/products_emc.html It’s nothing more than precision positioning of a near field probe. It’s not bad for localizing potential noise sources, but it won’t help much find the coupling paths or the transmitting antennae. From: Marko Radojicic [mailto:radojic...@yahoo.com] Sent: Tuesday, November 30, 2010 4:23 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Re: Camera to take pictures of 30MHz to 1000MHz Electromagnetic-Spectrum emissions You can also try: http://www.emscan.com/emscan/AboutEMSCAN.cfm I was peripherally involved with the development about 20 years ago but imagine it has changed since then. As always - Caveat Emptor. ...Marko ________________________________ From: "McInturff, Gary" <gary.mcintu...@esterline.com> To: EMC-PSTC@LISTSERV.IEEE.ORG Sent: Tue, November 30, 2010 3:38:49 PM Subject: Re: [PSES] Camera to take pictures of 30MHz to 1000MHz Electromagnetic-Spectrum emissions I’ve tried beer goggles with little useful effect – well not useful for EMC anyway. I don’t think you’ll have a camera but there are devices that scan a pcb and plot out relative levels. http://www.detectus.se/products_emc.html I know nothing of them except they exist and that I haven’t seen anyone buy one. ________________________________ From: Chuck McDowell [mailto:chu...@meyersound.com] Sent: Tuesday, November 30, 2010 3:28 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: [PSES] Camera to take pictures of 30MHz to 1000MHz Electromagnetic-Spectrum emissions Because it never hurts to ask, any leads on where to buy a device that will allow me to look at a PCBA and see the 30MHz to 1000MHz Electromagnetic-Spectrum emissions like a photograph? Signed Stumped in Berkeley Ca. Chuck McDowell Meyer Sound Laboratories Inc. NOTICE: This email may contain confidential information. Please see http://www.meyersound.com/confidential/ for our complete policy. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>
