John, You can start with EN 61439-1:2011 - "Low-voltage switchgear and controlgear assemblies - Part 1: General rules." Years ago, we VDE-Certified a non-North American circuit-breaker panel using EN 60439-1, the above standard's predecessor. Hope this helps, DON GIES ALCATEL-LUCENT SENIOR PRODUCT COMPLIANCE ENGINEER BELL LABS - GLOBAL PRODUCT COMPLIANCE LABORATORY 600-700 Mountain Avenue Room 5B-104 Murray Hill, NJ 07974-0636 USA Phone: +1 908 582 5978 Fax: +1 908 582 0582 don.g...@alcatel-lucent.com MEMBER, ALCATEL-LUCENT TECHNICAL ACADEMY _____
From: jral...@productsafetyinc.com [mailto:jral...@productsafetyinc.com] Sent: Tuesday, November 22, 2011 6:40 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Industrial Panel Shop for UL Hi, Has anyone worked with Industrial Panel shops for CE? UL508A is for Panel Shops in the USA. Is EN60204 the equivalent for the EU? Thanks, John Allen Product Safety Consulting, Inc. 605 Country Club Drive, Suites I & J Bensenville, IL 60106 P - 630 238-0188 / F - 630 238-0269 1-877-804-3066 <mailto:jral...@productsafetyinc.com> jral...@productsafetyinc.com http://www.productsafetyinc.com <http://www.productsafetyinc.com/> Although PSC maintains the highest level of virus protection, this e-mail and any attachments should be scanned by your virus protection software. It is the responsibility of the recipient to check that it is virus free. PSC does not accept any responsibility for data loss or systems damage arising in any way from its use. This message is confidential and intended only for the individual to whom or entity to which it is addressed. If you are not the intended recipient or addressee, or an employee or agent responsible for delivering this message to the addressee, you are hereby notified that any dissemination, distribution, or copying, in whole or part, of this message is strictly prohibited. If you believe that you have been sent this message in error, please do not read it. Please immediately reply to sender that you have received this message in error. Then permanently delete all copies of the message. Thank you. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://product-compliance.oc.ieee.org/ Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>