On Tue, 13 May 2008 15:06:20 -0400, "Rudd, Adam" <ar185...@ncr.com> wrote:
> Additionally, it notes that CENELEC added Annex ZA. Annex ZA is found > on page 5. It lists the normative references and shows the correlation > between European and International standards which has this following > note... > > "NOTE: When an international publication has been modified by common > modifications, indicated by (mod), the relevant EN/HD applies." And CENELEC Guide 25 Annex 3 says: When there is a directly corresponding edition of CENELEC EN to the referred international standard and that international reference is dated, the annex ZA gives the indication of the corresponding CENELEC document (mostly EN) with its date. Remark: In this case, the dated edition of CENELEC EN applies (modified or not according to the case) ... Regards, Tom Tomonori Sato <vef00...@nifty.ne.jp> URL: http://homepage3.nifty.com/tsato/ - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
