If the card reader operates as an intentional radiator and at frequencies less than 490 kHz, it is also covered by the 40 dB exemption. This exemption says that if the device has more than 40 dB of margin to the limit, it can be treated as verification instead of certification. Many card readers operate at ~125 kHz.
Don Umbdenstock Manager Compliance Engineering Tyco Safety Products / Sensormatic 6600 Congress Avenue Boca Raton, FL 33487 USA Phone: 561.912.6440 djumbdenst...@tycoint.com From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of rehel...@mmm.com Sent: Tuesday, June 10, 2008 8:39 AM To: emc-p...@ieee.org Subject: Fw: Antwort: Re: FCC requirements for Card Readers As an additional note, if the card reader contained RFID then it would fall under Subpart C. Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 =========================================================== ----- Forwarded by Robert E. Heller/US-Corporate/3M/US on 06/10/2008 07:39 AM ----- Robert E. Heller/US-Corpora te/3M/US To emc-p...@ieee.org 06/10/2008 07:36 cc AM mlehm...@herberg-sp.de Subject Re: Antwort: Re: FCC requirements for Card Readers(Document link: Robert E. Heller) The requirements would be CFR 47, Part 15, Subpart B, Class A: 15.19 Labeling 15.105 Info to User 15.107 Conducted Emissions 15.109 Radiated Emissions The procedure would be ANSI C63.4 You can find the requirements at: www.gpoaccess.gov/cfr/retrieve.html Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 ============================================================ mlehmann@herberg- sp.de To 06/10/2008 06:41 rehel...@mmm.com AM cc Subject Antwort: Re: FCC requirements for Card Readers Bob, yes, I do. Regards Mario Lehmann Geschäftsbereich European Compliance Laboratory (ECL) __________________________________________________ HERBERG. Service Plus GmbH Tel: +49 911 59835-923 Nordostpark 51 Fax: +49 911 59835-90 90411 Nürnberg mailto: mlehm...@herberg-sp.de http://www.herberg-sp.de Amtsgericht Nürnberg Geschäftsführer HRB 19587 Peter Birkmann rehel...@mmm.com 10.06.2008 10:39 An mlehm...@herberg-sp.de Kopie Thema Re: FCC requirements for Card Readers Do you mean the ones that read the magnetic strips on credit or debit cards? Bob Heller 3M EMC Laboratory, 76-1-01 St. Paul, MN 55107-1208 Tel: 651- 778-6336 Fax: 651-778-6252 ========================= mlehmann@herberg- sp.de Sent by: To emc-p...@ieee.org emc-p...@ieee.org cc 06/10/2008 03:01 Subject AM FCC requirements for Card Readers Can somebody give advice, which FCC requirements apply for Card Readers and what is the procedure? Thank you in advance! Mario Lehmann Geschäftsbereich European Compliance Laboratory (ECL) __________________________________________________ HERBERG. Service Plus GmbH Tel: +49 911 59835-923 Nordostpark 51 Fax: +49 911 59835-90 90411 Nürnberg mailto: mlehm...@herberg-sp.de http://www.herberg-sp.de Amtsgericht Nürnberg Geschäftsführer HRB 19587 Peter Birkmann - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
