Hello Colleagues After rain on an OATS, what are your typical guidelines for the resumption of test? I worked with one great engineer on this board at one time who had seen dramatic differences on his OATS after rain and would shut down until the next day when the site was dry. We are trying to run two shifts here and in S. Florida have afternoon rains that are frequently short in duration. I have done a few experiments that shows that it seems OK as long once the rain has stopped and any standing water has run off. There are some damp spots under the ground mesh and maybe some residual moisture on the mesh. Thoughts? Experiences? Regards, Mac Elliott - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
