HI Brian, I use Times Radio LMR-400-PVC I believe it is: it's usable to 12 GHz or so. I have also used Sucoflex cables to go to 18 GHz.
Sincerely Derek. Ken Javor wrote: > Instead of looking for that long piece of flexible low-loss cable, why > not procure a very short length of low-loss semi-rigid cable bent in > to the proper shape to allow for the opposite polarization. Up to 6 > GHz I would think the loss of that bent section would be low enough to > be insignificant, so that your overall cable loss would be no > different for your two different polarizations. If you’re a purist, > you could have two identical lengths of this short semi-rigid, each > formed for a specific polarization, and that way your cable losses > would be identical to two decimal places to the right of the decimal > point. > > Ken Javor > > Phone: (256) 650-5261 > > > ------------------------------------------------------------------------ > *From: *"Kunde, Brian" <brian_ku...@lecotc.com> > *Date: *Tue, 15 Jul 2008 16:20:03 -0400 > *To: *<emc-p...@ieee.org> > *Conversation: *Low Loss Coax Cable > *Subject: *Low Loss Coax Cable > > What coax cable types do you recommend for a very low loss cable up to > 6Ghz but also flexible? I need a good low loss cable to connect > between my horn antenna and the floor connection of my Heliax. The > cable only needs to be 5 or 6 feet long but flexible enough so I can > change polarization on my antenna. > > I have looked at many cable types in catalogs and on-line but you > cannot tell if it will be flexible without seeing it for real. I > ordered a cable called “Helical Super Flex”. I liked the low loss > properties but it was not at all flexible, let alone super flexible. > It was barely semi-rigid in my book . > > I tried RG393/U but it is not very flexible and I prefer a lower loss > cable if possible. > > What do you all recommend? What is the best? Where can I buy it in > small quantities and possibly in custom lengths? > > Thanks to all in advance. > > The Other Brian > > > > > > _________________________ > > *LECO Corporation Notice*: This communication may contain confidential > information intended for the named recipient(s) only. If you received > this by mistake, please destroy it and notify us of the error. Thank > you. - > ---------------------------------------------------------------- This > message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. Website: http://www.ieee-pses.org/ > To post a message to the list, send your e-mail to emc-p...@ieee.org > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org > > For policy questions, send mail to: > > Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc - > ---------------------------------------------------------------- This > message is from the IEEE Product Safety Engineering Society emc-pstc > discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to emc-p...@ieee.org > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org > > For policy questions, send mail to: > > Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > - ---------------------------------------------------------------- > This message is from the IEEE Product Safety Engineering Society > emc-pstc discussion list. Website: http://www.ieee-pses.org/ > > To post a message to the list, send your e-mail to emc-p...@ieee.org > > Instructions: http://listserv.ieee.org/request/user-guide.html > > List rules: http://www.ieee-pses.org/listrules.html > > For help, send mail to the list administrators: > > Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org > > For policy questions, send mail to: > > Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com > > All emc-pstc postings are archived and searchable on the web at: > > http://www.ieeecommunities.org/emc-pstc > - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
