Fun to watch, but a hoax. http://www.snopes.com/science/cookegg.asp Regards, Conan
________________________________ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Ted Eckert Sent: Tuesday, August 19, 2008 9:44 AM To: emc-p...@ieee.org Subject: RE: RF What-if (was: RE: Another Cancer Scare?) It is an interesting video, but it could easily have been staged. The view under the table was blocked and we are presented with only a narrow view of events seen through the camera's lens. It would be easy enough to run and document a scientific experiment. I doubt you will find any such experiment on the web or anywhere else. The whole concept seems a bit outlandish. Put a few kernels of corn in a microwave oven and you will find that it takes much longer. Am I to believe that a 1000 watt oven designed to contain the energy within a fixed space has more trouble popping corn than a few low power cell phones can do in open space? Am I to believe that a cell phone can pop corn within seconds yet causes no noticeable heating to my hand when I hold it when it rings? The amount of energy required to raise the water in one kernel of corn to boiling is very low. It takes only 418 mW to raise one milligram of water 100 degrees Celsius. However, the actual energy reaching a kernel of corn from the cell phone is going to be far less than that. The phone's energy is not concentrated in one direction. It is interesting to me that the cell phones' antenna tips are pointed at the corn even though that is not the direction that the most energy would be radiated. This appears to be a well staged hoax but nothing more. Ted Eckert The opinions expressed are my own and do not necessarily reflect those of my employer. --- On Mon, 8/18/08, John Shinn <jmsh...@pacbell.net> wrote: From: John Shinn <jmsh...@pacbell.net> Subject: RE: RF What-if (was: RE: Another Cancer Scare?) To: emc-p...@ieee.org Date: Monday, August 18, 2008, 8:32 PM Sorry -- Something got lost in the translation. Try again. It was not supposed to be a map. Apparently the "p" got lost. http://tinyurl.com/69na9p John -----Original Message----- From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of John Shinn Sent: Sunday, August 17, 2008 5:35 PM To: emc-p...@ieee.org Subject: RE: RF What-if (was: RE: Another Cancer Scare?) Take a look at this. http://tinyurl.com/69na9 Regards, John Shinn, P.E. - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - ------------------------------------- Confidentiality Notice: The information contained in this transmission is legally privileged and confidential, intended only for the use of the individual(s) or entities named above. This email and any files transmitted with it are the property of Pelco. If the reader of this message is not the intended recipient, or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any review, disclosure, copying, distribution, retention, or any action taken or omitted to be taken in reliance on it is prohibited and may be unlawful. If you receive this communication in error, please notify us immediately by telephone call to +1-559-292-1981 or forward the e-mail to administra...@pelco.com and then permanently delete the e-mail and destroy all soft and hard copies of the message and any attachments. Thank you for your cooperation. - ------------------------------------- - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: emc-p...@daveheald.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc