Hi Grace et al,
The Japanese battery requirement and the pertinent November 20, 2008 information originate from METI’s Electrical Appliance and Material Safety Law and can be obtained at their website: http://www.meti.go.jp/english/policy/economy/consumer/pse/index.html. IHTH those needing this information. Best regards, Ron Pickard RPQ Consulting Glendale, AZ 85303 +623.512-3451 tel, +623.848-9033 fax rpick...@rpqconsulting.com www.rpqconsulting.com <http://www.rpqconsulting.com/> www.linkedin.com/in/RonPickard ________________________________ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Grace Lin Sent: Monday, October 27, 2008 12:18 PM To: emc-p...@ieee.org Subject: Re: Cell and Battery Designation in IEC 61960 Hi John, Thank you very much. We have several different types of batteries. Lithium battery is one of them. I believe the Japanese requirement starting November 20, 2008 is for the lithium battery. I assume the PSE mark required is the diamond one (not circle one). Please confirm. Best regards, Grace On 10/27/08, Tyra, John <john_t...@bose.com> wrote: Hello Grace, If it is a Lithium battery then it does require a (PS)E mark by November 10th …………what type of battery do you have? From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Grace Lin Sent: Friday, October 24, 2008 2:05 PM To: emc-p...@ieee.org Subject: Re: Cell and Battery Designation in IEC 61960 Thank you, Jody. Do you know if PSE mark is required per Japan for the battery? On 10/24/08, Leber Jody-G19980 <jody.le...@motorola.com> wrote: Grace, N5 represents the number of parallel connected cells indicating it belongs to the battery designation. Best Regards, Jody Leber Program Manager jody.le...@motorola.com http://www.motorola.com/producttesting Motorola Product Testing Services 1700 Belle Meade Court Lawrenceville, GA 30043 770.338.3581 P 404.387.1224 C 847.761.3145 F ________________________________ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Grace Lin Sent: Friday, October 24, 2008 10:21 AM To: emc-p...@ieee.org Subject: Cell and Battery Designation in IEC 61960 Dear Members, Can someone confirm the following "Cell and battery designation" under 5.1 of IEC 61960: 2003? "Battery shall be designated with the following form: N 1 A1 A2 A3 N2 / N3 / N4 – N5 Cells shall be designated with the following form: A 1 A2 A3 N2 / N3 / N4 " The Japanes JIS C8711: 2006 standard has the following designation: "Battery shall be designated with the following form: A1 A2 A3 N2 / N3 / N4 Cells shall be designated with the following form: N1 A1 A2 A3 N2 / N3 / N4 –N5 " Do I miss any amendment or correction to either standard? Thank you and look forward to your help. Best regards, Grace - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. Website: http://www.ieee-pses.org/ To post a message to the list, send your e-mail to emc-p...@ieee.org Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas emcp...@ptcnh.net Mike Cantwell mcantw...@ieee.org For policy questions, send mail to: Jim Bacher: j.bac...@ieee.org David Heald: dhe...@gmail.com All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
