Pete (or anyone on the list), do you know of a human body circuit model
that is above 1 MHz? The circuits that are talked about below only go to a
megahertz.
Bob Heller
3M EMC Laboratory, 76-1-01
St. Paul, MN 55107-1208
Tel: 651- 778-6336
Fax: 651-778-6252
===========================================================
"Pete Perkins"
<peperkinspe@cs.c
om> To
Sent by: "'Mike Hurley'"
emc-p...@ieee.org <mikehur...@meadtest.com>
<emc-p...@ieee.org>
cc
10/16/2008 11:25
AM Subject
RE: Touch test
Mike,
The Touch Current test circuits are taken directly from IEC
60990 (Measurement of Touch Current and Protective Conductor Current).
A collection of Touch Current measurements measured with the
circuit that includes the frequency compensation network shown in these
standards (called the Perception-Reaction network) can be found at
www.safetylink.com by searching on perkins.
:>) br, Pete
Peter E Perkins, PE
Principal Product Safety Engineer
PO Box 23427
Tigard, ORe 97281-3427
503/452-1201 fone/fax
p.perk...@ieee.org
-----Original Message-----
From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Mike
Hurley
Sent: Tuesday, October 14, 2008 7:35 AM
To: emc-p...@ieee.org
Subject: Touch test
Can anyone tell me if the touch test circuits of 60950 and 60065 are
the same?
Mike Hurley
Director
Mead testing ltd
mikehur...@meadtest.com
www.meadtest.com
phone 44 (0) 1279 635865
fax 44 (0) 1279 635874
Mead Testing Limited is a company registered in England with company
number 4572600 whose registered office is: Unit 25 Mead Park, River
Way, Harlow, CM20 2SE. VAT number: 802 3904 59
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to emc-p...@ieee.org
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas emcp...@ptcnh.net
Mike Cantwell mcantw...@ieee.org
For policy questions, send mail to:
Jim Bacher: j.bac...@ieee.org
David Heald: dhe...@gmail.com
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to emc-p...@ieee.org
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas emcp...@ptcnh.net
Mike Cantwell mcantw...@ieee.org
For policy questions, send mail to:
Jim Bacher: j.bac...@ieee.org
David Heald: dhe...@gmail.com
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
-
This message is from the IEEE Product Safety Engineering Society
emc-pstc discussion list. Website: http://www.ieee-pses.org/
To post a message to the list, send your e-mail to emc-p...@ieee.org
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas emcp...@ptcnh.net
Mike Cantwell mcantw...@ieee.org
For policy questions, send mail to:
Jim Bacher: j.bac...@ieee.org
David Heald: dhe...@gmail.com
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
