Neil,

This question has been raised a few times in the past years: 300386 excludes
terminal equipment beyond the NTP (ref. scope)

 

Kind regards,

 

Kris Carpentier

Regulatory & Approvals

 

________________________________

From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Barker, Neil
Sent: donderdag 6 november 2008 12:04
To: 'SYKES WILLIAM T-WRQ876'; emc-p...@ieee.org
Subject: RE: EN 300386 - RE: New Official Journal list of EMC standards

 

William

 

I would expect that this standard is listed under the R&TTE Directive, not the
EMC Directive, even though it is an EMC standard; it is primarily an R&TTE
standard.

 

Neil Barker

Manager

Central Quality

 

e2v

106 Waterhouse Lane, Chelmsford, Essex, CM1 2QU, England

Tel:         +44 (0)1245 453616

Mobile:   +44 (0)7801 723735

Fax:        +44 (0)1245 453571

 www.e2v.com <http://www.e2v.com/> 

 

P Consider the environment: do you really need to print this e mail?

 

 

________________________________

From: SYKES WILLIAM T-WRQ876 [mailto:william.t.sy...@motorola.com] 
Sent: 05 November 2008 18:36
To: emc-p...@ieee.org
Subject: EN 300386 - RE: New Official Journal list of EMC standards

All:

EN 300 386 V1.4.1 (04-2008) Electromagnetic compatibility and radio spectrum
matters (ERM) — Telecommunication network equipment — Electromagnetic
compatibility (EMC) requirements is missing from the list.  

This ETSI standard list the following dates (I hope this copied table passes
without corruption!):

 

National transposition dates 

Date of adoption of this EN: 

11 April 2008 

Date of latest announcement of this EN (doa): 

31 July 2008 

Date of latest publication of new National Standard 

 

or endorsement of this EN (dop/e): 

31 January 2009 

Date of withdrawal of any conflicting National Standard (dow): 

31 July 2011 

Based on the dates above, should this one have been listed, eventually
superseding v1.2.1, v1.3.1, v1.3.2, and v1.3.3 (all supposedly still
simultaneously valid)?

Is EN 300 386 V1.4.1 usable as a Harmonized Standard giving a presumption of
conformity, or wait until published?

William T. Sykes

Compliance Engineer

Motorola Home & Networks Mobility

101 Tournament Drive

Horsham, PA 19044

215-323-2619

william.t.sy...@motorola.com 

 

 

________________________________

From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Ralph McDiarmid
Sent: Wednesday, November 05, 2008 1:13 PM
To: emc-p...@ieee.org
Subject: FW: New Official Journal list of EMC standards

 

 EN50178:1997 is missing from this list.  Has it been superseded,  or is it
now a rogue standard?

Ralph McDiarmid, AScT 
Compliance Engineering Group 
Xantrex Technology Inc. 

From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Brian Jones
Sent: Wednesday, November 05, 2008 1:23 AM
To: emc-p...@ieee.org
Subject: New Official Journal list of EMC standards

 

Everyone

 

A new list of harmonised standards for 2004/108/EC was published in the OJ on
4 November.  It may be downloaded from here

http://eur-lex.europa.eu/LexUriServ/Lex
riServ.do?uri=OJ:C:2008:280:0014:0032:EN:PDF 

 

You will see that A1 to EN 55022:2006 has been listed.  It may be used now,
but does not have to be applied until 1 October 2010.

 

Best wishes

 

Brian  

 

Brian Jones

EMC Consultant

 

http://www.ieeecommunities.org/emc-pstc 


______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email 
______________________________________________________________________

Sent by E2V TECHNOLOGIES PLC or a member of the E2V group of companies. A
company registered in England and Wales. 

Company number; 04439718. 

Registered address; 106 Waterhouse Lane, Chelmsford, Essex, CM1 2QU, UK.

-



This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to emc-p...@ieee.org 

Instructions: http://listserv.ieee.org/request/user-guide.html 

List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:

Scott Douglas emcp...@ptcnh.net
Mike Cantwell mcantw...@ieee.org 

For policy questions, send mail to:

Jim Bacher: j.bac...@ieee.org
David Heald: dhe...@gmail.com 

All emc-pstc postings are archived and searchable on the web at:

http://www.ieeecommunities.org/emc-pstc 

-



This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. Website: http://www.ieee-pses.org/ 

To post a message to the list, send your e-mail to emc-p...@ieee.org 

Instructions: http://listserv.ieee.org/request/user-guide.html 

List rules: http://www.ieee-pses.org/listrules.html 

For help, send mail to the list administrators:

Scott Douglas emcp...@ptcnh.net
Mike Cantwell mcantw...@ieee.org 

For policy questions, send mail to:

Jim Bacher: j.bac...@ieee.org
David Heald: dhe...@gmail.com 

All emc-pstc postings are archived and searchable on the web at:

http://www.ieeecommunities.org/emc-pstc 


Reply via email to