Tim,
Sure. In clause 3.2.3, “Permanently connected equipment”, it says: “PERMANENTLY CONNECTED EQUIPMENT shall be provided with <either >(strikethrough): * a set of terminals as specified in 3.3; <or> (strikethrough) * <a NON-DETACHABLE POWER SUPPLY CORD> (strikethrough) PERMANENTLY CONNECTED EQUIPMENT having a set of terminals shall:” This has been there since UL 1950 and CSA C22.2 No. 950 of old times. The source of this omission is in the following US National Electrical Code and Canadian Electrical Code, Part I sections: NEC (2008), Article 400 – FLEXIBLE CORDS AND CABLES “400.7 Uses Permitted.” “(B) Attachment Plugs. Where used as permitted in 400.7(A)(3), (A)(6), and (A)(8), each flexible cord shall be equipped with an attachment plug and shall be energized from a receptacle outlet.” “400.8 Uses Not Permitted. Unless specifically permitted in 400.7, flexible cords shall not be used for the following:” (1) As a substitute for the fixed wiring of a structure (4) Where attached to building surfaces (6) Where installed in raceways, except as otherwise permitted in this Code. CSA C22.1, Canadian Electrical Code, Part I (2006), 4-010, Uses of flexible cords (3) Flexible cords shall not be used (a) as a substitute for the fixed wiring of structures and shall not be (i) permanently secured to any structural member; Best Regards, Don Gies, N.C.E Senior Product Compliance Engineer Alcatel-Lucent Murray Hill, NJ 07974-0636 USA ________________________________ From: Haynes, Tim (SELEX GALILEO, UK) [mailto:tim.hay...@selexgalileo.com] Sent: Thursday, November 20, 2008 4:03 AM To: Don Gies; EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: What's the deal with Wire Nuts? Don, Hi. In your response to Brian you said... " However, written into the body of the IEC 60950-1 and EN 60950-1 (and other national derivative standards) is a wiring method for permanent connection to the mains not acceptable in the US and Canada – the use of a non-detachable power supply cord for permanent connection. " Can you please supply to me the reference that prohibits that wiring method in US and Canada? Regards Tim ************************ Tim Haynes A1N10 Electromagnetic Engineering Specialist SELEX Sensors and Airborne Systems 300 Capability Green Luton LU1 3PG * Tel : +44 (0)1582 886239 * Fax : +44 (0)1582 795863 * Mob : +44 (0)7703 559 310 * E-mail : tim.hay...@selexgalileo.com P Please consider the environment before printing this email. There are 10 types of people in the world-those who understand binary and those who don't. J. Paxman SELEX Sensors and Airborne Systems Limited Registered Office: Sigma House, Christopher Martin Road, Basildon, Essex SS14 3EL A company registered in England & Wales. Company no. 02426132 ******************************************************************** This email and any attachments are confidential to the intended recipient and may also be privileged. If you are not the intended recipient please delete it from your system and notify the sender. You should not copy it or use it for any purpose nor disclose or distribute its contents to any other person. ******************************************************************** - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>