If your product is being transported in packaging or a transportation case, you may consider ISTA standards.
http://www.ista.org/ For general testing, look at the IEC 60068 series. There are standards for individual environmental tests and some for combined testing. Take a look at IEC 60068-2-31 for a test procedure to simulate rough handling. Ted Eckert Compliance Engineer Microsoft Corporation ted.eck...@microsoft.com The opinions expressed are my own and do not necessarily reflect those of my employer. From: John Harrington [mailto:jharring...@keithley.com] Sent: Wednesday, December 17, 2008 1:16 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Hi Group Does anyone have any recommendations for environmental test standards (vibration,, shock, temp, humidity etc) for sensitive test and measurement equipment that will be transported around a lot. We normally use MIL-PRF-28800F but my manager has decided that this isn’t severe enough and has sent me off to look for something else. The only other standard I have familiarity with is NEBS GR-63 and I don’t think he would want to go that far! Thanks John Harrington Compliance Engineer Keithley Instruments, Inc. jharring...@keithley.com Tel: 440 498 2727 _____________________________________________________________________________ Scanned by IBM Email Security Management Services powered by MessageLabs. For more information please visit http://www.ers.ibm.com _____________________________________________________________________________ - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>