Hello Group,
I am wondering if anyone in the group knows of a manufacturer of the
calibration fixture called out in Annex B.5 of CISPR 16-1-3 Ed 2.0 (2004-06)
for the absorbing clamp, or a more detailed diagram that better describes on
how the calibration fixture should be constructed. Thanks in advance.
Larry K. Stillings
Compliance Worldwide, Inc.
357 Main Street
Sandown, NH 03873
(603) 887 3903 Fax 887-6445
www.complianceworldwide.com
Privileged/Confidential Information may be contained in this message. If you
are not the addressee indicated in this message (or responsible for delivery
of the message to such person), you may not copy or deliver this message to
anyone. In such case, you should destroy this message and kindly notify the
sender by reply email. Please advise immediately if you or your employer do
not consent to Internet email for messages of this kind. Opinions, conclusions
and other information in this message that do not relate to the official
business of my firm shall be understood as neither given nor endorsed by it.
-
This message is from the IEEE Product Safety Engineering Society emc-pstc
discussion list. To post a message to the list, send your e-mail to
<emc-p...@ieee.org>
All emc-pstc postings are archived and searchable on the web at
http://www.ieeecommunities.org/emc-pstc
Graphics (in well-used formats), large files, etc. can be posted to that URL.
Website: http://www.ieee-pses.org/
Instructions: http://listserv.ieee.org/request/user-guide.html
List rules: http://www.ieee-pses.org/listrules.html
For help, send mail to the list administrators:
Scott Douglas <emcp...@ptcnh.net>
Mike Cantwell <mcantw...@ieee.org>
For policy questions, send mail to:
Jim Bacher <j.bac...@ieee.org>
David Heald <dhe...@gmail.com>
