So the document called "COMMISSION REGULATION (EC) No 1275/2008 of 17 December 2008" is not the EuP Directive but references it, and is intended to revise the EuP Directive ?
And the document called "DIRECTIVE 2005/32/EC OF THE EUROPEAN PARLIMENT AND OF THE COUNCIL" is the EuP, and contains the 'Annex V' to which the former is refering to ? From: emc-p...@ieee.org [mailto:emc-p...@ieee.org]On Behalf Of John Woodgate Sent: Tuesday, January 13, 2009 11:49 AM To: emc-p...@ieee.org Subject: Re: First EUP Regulation implementation regarding standby power In message <72B8947772CF0948ADAA9853631663FB28537C8710@PBI-NAMSG-02.MGDPBI.g lobal.pv t>, dated Tue, 13 Jan 2009, Jim Hulbert <jim.hulb...@pb.com> writes: >Article 4 refers to the "management system set out in Annex V". I don't see any problem. Article 4 says: The procedure for assessing conformity referred to in Article 8(2) of Directive 2005/32/EC shall be the internal design control system set out in Annex IV to Directive 2005/32/EC or the management system set out in Annex V to Directive 2005/32/EC. Annex V is in the cited Directive. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>
