If the product is so small that it cannot accomodate a 5mm CE marking, then the size may be reduced as long as it is clearly legible and not likely to be confused with any other marking, or alternatively the marking may be applied to the packaging and/or the documentation.
Best regards Neil R. Barker CEng MIET HonFSEE MIEEE Manager Quality Engineering e2v technologies (uk) ltd 106 Waterhouse Lane Chelmsford Essex CM1 2QU UK Tel: (+44) 1245 453616 Fax: (+44) 1245 453571 Mob: (+44) 7801 723735 P Please consider the environment before printing this email. From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of kbalasubraman...@scmmicro.co.in Sent: 22 January 2009 12:21 To: emc-p...@ieee.org Subject: CE logo dimension in small products Dear Experts, We generalised our CE logo with 5 mm size in all our products. Currently we are producing a small sized product where we cannot keep the CE logo size at 5 mm. What is the minimum size recommended / prescribed in the standard for the CE logo. If the product cannot accommodate the minimum size prescribed then what is the alternate solution? Sincerely SCM Microsystems (India) Pvt. Ltd. K. Balasubramanian Modules 0506, 0507 & 0508, D - Block, Manager - Hardware South Wing, TIDEL Park, Tel : +91 44 42931391 #4, Rajiv Gandhi Road,(formerly Canal Bank Road) Fax :+91 44 22540029 Taramani, Chennai - 600113. India E-mail:kbalasubraman...@scmmicro.co.in Web : http://scmmicro.com 'This email and any attachment may contain confidential information and are intended solely for the use of the named recipient(s). If you have received this information in error, you are prohibited from reading, copying, distributing and using the information. If you are not a named addressee or otherwise an intended recipient you are requested to immediately notify the sender and to delete this email and all attachments from your system.' - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> ______________________________________________________________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ Sent by E2V TECHNOLOGIES PLC or a member of the E2V group of companies. A company registered in England and Wales. Company number; 04439718. Registered address; 106 Waterhouse Lane, Chelmsford, Essex, CM1 2QU, UK. ______________________________________________________ ________________ This email has been scanned by the MessageLabs Email Security System. For more information please visit http://www.messagelabs.com/email ______________________________________________________________________ - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>