I don't have a copy of CISPR 16 to reference and so I am curious about how one calibrates an AMN? (or an antenna for that matter). I can see characterizing the AMN so that its transducer factor versus frequency is known and can be then used to calculate a uV level.
Ralph McDiarmid, AScT Compliance Engineering Group Xantrex Technology Inc From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of John Woodgate Sent: Tuesday, January 27, 2009 5:22 AM To: emc-p...@ieee.org Subject: Re: Calibration Standards for LISN In message <2a93eb060901270504k7eaa02c2n50fc3b9016a03...@mail.gmail.com>, dated Tue, 27 Jan 2009, Grace Lin <graceli...@gmail.com> writes: >For LISN calibration, what are the calibration standards that I should >fill in in the questionaire requested by a calibration lab? Are ANSI >C63.4, CISPR 15, and CISPR 22 appropriate? These are three test >standards I use most. No, LISN calibration is in CISPR 16-1-2, where they are called Artificial Mains Networks (AMNs). See clause 4 and Annex A. It is a good move to get your LISNs calibrated. Recent experience at a test house showed significant differences between supposedly good LISNs. -- OOO - Own Opinions Only. Try www.jmwa.demon.co.uk and www.isce.org.uk Things can always get better. But that's not the only option. John Woodgate, J M Woodgate and Associates, Rayleigh, Essex UK - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>