Brian, I believe that you are looking for “tri-rated” cable. There are suppliers that have a multi-rating; typically they spec the wire in mm^2 from what I have found.
Curtis Bender | 616.994.4221 | curtis.ben...@tennantco.com ________________________________ From: emc-p...@ieee.org [mailto:emc-p...@ieee.org] On Behalf Of Ted Eckert Sent: Wednesday, January 28, 2009 6:24 PM To: Brian Ceresney; EMC-PSTC@LISTSERV.IEEE.ORG Subject: RE: Mains power cables with North American and European Approvals Hello Brian, There are cables with both UL and European approvals. I don’t know if any vendors have 1.5 mm2 cable, but they do have universal jumpers for lower currents. The list below represents what I know about. This is not an endorsement of any of these vendors. There are also likely other vendors with cables with both North American and European approvals. http://www.volex.com/index.php?option=c m_ecatalog&task=classlist&countryid=23&Itemid=31 http://www.alphawire.com/pages/302.cfm http://www.qualtekusa.com/Catalog/Power%20Cords/PDF%20Files/319002t01.pdf Ted Eckert Compliance Engineer Microsoft Corporation ted.eck...@microsoft.com The opinions expressed are my own and do not necessarily reflect those of my employer. From: Brian Ceresney [mailto:bceres...@delta-q.com] Sent: Wednesday, January 28, 2009 3:10 PM To: EMC-PSTC@LISTSERV.IEEE.ORG Subject: Mains power cables with North American and European Approvals Greetings All, After searching numerous websites, and enduring countless blank stares from possible suppliers…. I am trying to find 3 conductor power cord that is rated 105C, 250V, 14Awg(1.5^2), SJ Type or equivalent, with UL/CSA Approvals as well as approval(HAR?) by one of the European safety organizations, with little luck. Are these approvals mutually exclusive? Or just rarely needed, because country specific cords/connectors are required in the final application? Your comments are much appreciated. Best Regards, Brian Ceresney, CTech. Test and Regulatory Team Lead, Delta-Q Technologies Corp. Unit 3 - 5250 Grimmer Street Burnaby, BC Canada V5H 2H2 Tel: 604-327-8244 Ext.112 Fax: 604-327-8246 Cell: 778-839-9765 www.delta-q.com bceres...@delta-q.com <mailto:bceres...@delta-q.com> Confidentiality Notice: This email message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy all copies of the original message. - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>
