Dear colleagues;
Can anyone advise me when EMC testing an audio power amplifier to the EN55103 standards what the specified settings for the controls and audio signal levels when exercising the EUT during the applied EMC tests? I was informed some time ago that the amplifier should be set to output a 1kHz sinewave at one eighth of the non-clipped output power. Is this correct? Many thanks in advance. Ian McBurney. Allen & Heath Ltd. email:ian.mcbur...@allen-heath.com P Please consider the environment - do you really need to print this email? ***LEGAL DISCLAIMER*** This Email and any files transmitted with it are confidential and intended solely for the use of the individual to whom or the entity to which they are addressed. If you have received this email in error please notify the sender immediately. Please note that any views or opinions presented in this email are those of the author and do not necessarily represent those of Allen & Heath Limited. This email has been checked for the presence of viruses using Sophos AV Scanner. Anti-virus updates are downloaded on a daily basis . The recipient should also check this email and any attachments for the presence of viruses. Allen & Heath Limited accepts no liability for any damage caused by any virus transmitted via this email. This email has been sent from Allen & heath Limited, registered in England, reg. no:4163451. VAT Number GB 876 3336 94. Registered Address: Kernick Industrial Estate, Penryn, Cornwall. UK. TR10 9LU. *** - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@socal.rr.com> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>
