Grace, >From the point of view of your quality system, you should to an 'incoming inspection' for equipment returned after calibration. I would suggest two checks: 1. A review of the calibration certificate to check that the data is 'reasonable'. I've seen quite a few mistakes in these certificates, e.g. wrong parameters calibrated, wrong serial numbers, etc. Obvious you are probably not in a position to question 'reasonable' looking data. You should sign and date the certificate to document your approval. 2. If applicable, a simple on/off check to ensure that the instrument is operational.
Regards, Jon Griver http://www.601help.com <http://www.601help.com/> 2010/1/6 Grace Lin <graceli...@gmail.com> Dear Members, What is the procedure to check equipment back from calibration? I assume the equipment is fine after calibration. Is this assumption acceptable (from laboratory accreditation point of view)? Thank you. Best regards, Grace Lin - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@socal.rr.com> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com> - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@socal.rr.com> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>
