(This ties to a previous thread on site comparison)
I am considering getting a reference RF-source for two purposes: 1) Site/setup confidence check 2) Site comparison (by coupling it to a cabled-up DUT) My immediate interest is ~100 kHz up to 1-2 GHz, but I am also interested to use a reference source at higher frequencies. Does anyone have any recommendations regarding e.g. the following considerations: comb generator vs. noise generator, off-the-shelf vs. DIY, cost, etc. Thanks, Neven - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@socal.rr.com> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>