Well, the audit went well. The auditor had no problem with the 10cm spacers or the 80cm tables. However, he did have a bit of a problem with our ESD insulating mat, which he measured to be 0.45mm instead of the required 0.5mm. However, I mentioned the fact that the 61000-4-4 EFT standard is the only standard in the family that lists a tolerance, and it was +/- 10% for the 10cm spacing. So, he accepted the +/- 10%. I never figured my original question would spawn so much response. Thanks to everyone that participated. :-) Bob Richards, NCT.
- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@ptcnh.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher <j.bac...@ieee.org> David Heald <dhe...@gmail.com>