Posted for the recruiter by Scott Douglas, EMC-PSTC List Admin. Please contact the recruiter directly and off line.
EMI Technician The Candidate will be responsible for: -Set up test articles in EMI Chamber -Perform required EMI tests either using the Automated TILE Software or manually -Maintain the list of lab equipment and identify those items due calibration -Photograph test setups using digital camera -Document all test results on lab data sheets -Assist in preparing EMI Test Reports -Make recommendations for improvements in test procedures The candidate shall meet the following qualifications: - NARTE accredited EMI Technician with a minimum of 5 years of experience. - Familiar with testing to the various versions of MIL-STD-461. - Capable of setup and performing EMI tests with a minimum or no supervision. - Active SECRET clearance. - TEMPEST testing experience a plus. - Associates Degree (or the equivalent in work experience and training) required, Bachelors Degree a plus. THIS IS A PERMANENT POSITION LOCATED IN NORTHERN NEW JERSEY LOOKING TO PAY $85-$95K. Jeffrey McNeel Recruiter Aerotek, Inc Engineering Division Work (973) 560-5024 Fax (973) 560-5090 [email protected] - This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <[email protected]> All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc Graphics (in well-used formats), large files, etc. can be posted to that URL. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <[email protected]> Mike Cantwell <[email protected]> For policy questions, send mail to: Jim Bacher: <[email protected]> David Heald: <[email protected]>
