Ahh; if you were in the Northeast I had a couple of suggestions. The only place I've dealt with getting ISO 17025 accredited calibration in Florida is Voltech (Fort Myers), but they probably only do their own equipment.
I assume you know about Simco? http://www.simco.com/locations/us_east/miami_fl/ -Ken A. IBM On 12/19/11, Elliott Mac-FME001 <fme...@motorolasolutions.com> wrote: > Hi Ken > > We are close to Fort Lauderdale, Florida > > Best regards, > > Mac Elliott > > [ ] General Public > > -----Original Message----- > From: IBM Ken [mailto:ibm...@gmail.com] > Sent: Monday, December 19, 2011 10:32 AM > To: Elliott Mac-FME001 > Cc: EMC-PSTC@listserv.ieee.org > Subject: Re: Lab Needed for 17025 Accredited Calibration for Davis > Weather Station > > Where are you located? > > > On 12/19/11, Elliott Mac-FME001 <fme...@motorolasolutions.com> wrote: >> All >> >> >> >> Our cal guys are telling me that they are having a hard time finding a >> lab that can do 17025 accredited calibrations for our Davis Weather >> Monitor that we use on our OATS to measure temp / humidity / and >> barometric pressure during our testing. >> >> >> >> Any suggestions? >> >> >> >> Best regards, >> >> >> >> Mac Elliott >> >> >> [ ] General Public >> >> >> - >> ---------------------------------------------------------------- >> This message is from the IEEE Product Safety Engineering Society > emc-pstc >> discussion list. To post a message to the list, send your e-mail to >> <emc-p...@ieee.org> >> >> All emc-pstc postings are archived and searchable on the web at: >> http://www.ieee-pses.org/emc-pstc.html >> >> Attachments are not permitted but the IEEE PSES Online Communities > site at >> http://product-compliance.oc.ieee.org/ can be used for graphics (in >> well-used formats), large files, etc. >> >> Website: http://www.ieee-pses.org/ >> Instructions: http://listserv.ieee.org/request/user-guide.html >> List rules: http://www.ieee-pses.org/listrules.html >> >> For help, send mail to the list administrators: >> Scott Douglas <emcp...@radiusnorth.net> >> Mike Cantwell <mcantw...@ieee.org> >> >> For policy questions, send mail to: >> Jim Bacher: <j.bac...@ieee.org> >> David Heald: <dhe...@gmail.com> >> > > > - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>