Given the implementation differences between US/Canada(?) and EU on the medical 60601-1 standards. EU the June, US June 2013. How are folks handling new products being introduced now or in the very near future? Just got a quote back and the US certifier wants to charge me twice once for the 2nd edition and then to transition to the 3rd edition. I anyone else running aground on this. Seems like this should be happening on both sides of the pond - since a CB report to 3rd edition would run into the second edition enforcement in the US (and maybe Canada - I don't know their implementation date).
To be fair - I get good service once I get past the sticker shock and don't have any complaints from that standpoint. In fact I enjoy the engineering staff I work with. Different question about ESD. I have a component we tested on the normal 55024 directed ESD table for a table top mounted device. Worked fine, problem is that the customer places this on a large metallic roll around pedestal on rubber wheels. When they send it to a lab and test it this way there is a problem. I don't have the pedestal so I'm trying to simulate with my table and removing the 1 mohm bleeder resistor. Between discharges to the table, I ground a braided strap attached to the table top to my reference plane below. I get very similar results then. What should the braid really look like - should it just be a short, should it have some bleed resistance in it. I chose none since the discharge is going to be people touching the pedestal or other furniture that is grounded. What does the standard say about the VCP and HCP? Gary McInturff Reliability/Compliance Engineer Esterline Interface Technologies Featuring ADVANCED INPUT, MEMTRON, and LRE MEDICAL products 600 W. Wilbur Avenue Coeur d'Alene, ID 83815-9496 Office:208-635-8306 Cell: 509 868 2279 Toll Free: 800-444-5923 X 1238 gary.mcintu...@esterline.com<mailto:brian.s...@esterline.com> www.esterline.com/interfacetechnologies<http://www.esterline.com/advancedinput> Technology, Innovation, Performance... - ---------------------------------------------------------------- This message is from the IEEE Product Safety Engineering Society emc-pstc discussion list. To post a message to the list, send your e-mail to <emc-p...@ieee.org> All emc-pstc postings are archived and searchable on the web at: http://www.ieee-pses.org/emc-pstc.html Attachments are not permitted but the IEEE PSES Online Communities site at http://product-compliance.oc.ieee.org/ can be used for graphics (in well-used formats), large files, etc. Website: http://www.ieee-pses.org/ Instructions: http://listserv.ieee.org/request/user-guide.html List rules: http://www.ieee-pses.org/listrules.html For help, send mail to the list administrators: Scott Douglas <emcp...@radiusnorth.net> Mike Cantwell <mcantw...@ieee.org> For policy questions, send mail to: Jim Bacher: <j.bac...@ieee.org> David Heald: <dhe...@gmail.com>